• Fast, carefree work with the wrong tools most often leads to removed screws.
• Driving a screw excessive force, too high speed, or without a pilot holes can cause to be removed.
• Work slowly and carefully with the corresponding essential size and right-handed tools without cutting corners.

When you make repairs, compiling furniture or even upgrading electrical components, the last thing you want to deal with is a bolt.

“I see that the screws and tools for Mishaps are more often than I would like,” says Daniel Vasilevski, licensed electrician and the owner of pro electricity.

The best way to avoid the mistake is to know which is the wrong way to do something before you start. Here are the most common reasons you are always off the bolts and how to stop it.

Application of excessive force

One of the easiest ways to remove the screws is to go to her with too much force. The screws are ultimately, they are small pieces of metal that can damage other metal objects with relatively mild force. You need to make sure you treat them carefully, and don’t stuck a screwdriver and weird as much speed as possible and force.

“If you find yourself with a screw with a screw, don’t force it,” says Vasilevski. “Consider using a screw kit or even a rubber band trick for an additional priano. In the worst scenario, you may need to drill carefully, but it should be your last resort.”

Want a more home advice and inspiration of reno project? Sign up for our free daily newsletter for the latest needs for TOS, Reno and more!

Poor screw quality

Another question that Diyers are more difficult to encounter, especially when they try to cut corners on the project budget, is poor quality of the screws.

It is typically cheaper screws in relation to other bolts of the same size and species, which is worse quality metal. When you try to ride cheap, soft metal screws, many screws are immediately unfolding on a heavy metal screwdriver.

Health for this question is simple: Buy quality bolts that can handle force and torque of your screwdriver or drill.

Wrong essential size or type

In some cases, just start your job just to find out that the screwdriver is a little too big, too small or a wrong type.

“The screws usually fit when using the essence of the wrong size,” says Vasilevski. “I always advise people to clearly fit out of the use of driving heads that are” close enough “to the right size, it’s a safe way to download the screws.”

I’m going to properly may look like a waste of time, right until you remove the bolt and you have to figure out how to remove it. Instead, take time to ensure that you have real tools for work.

Uneven or mismatched placement of screwdriver

Proper technique is just as important as using the right size and type of business screw. Unpleasant or uneven placement and force will increase only the risk of removing the screw head.

“Lay and make sure your bit is lined right with a bolt,” says Vasilevski. “Don’t approach it at an angle. Ensure that it bites it significantly tightly without stains and apply stable, firm pressure without rush.”

Using worn or damaged bits worn

Relying on worn or damaged bits simply to avoid buying a replacement is a bad decision.

“Removing the screws can happen if you work with a worn bit that simply does not affect,” says Vasilevski. “The worn or messy bits of the screwdriver can quickly chew the screws.”

The bits that are already severely worn or rounded will not be able to properly fasten the screw, significantly increase the chances of taking off the screw.

Driving with screws at high speed

Using a drill can be a great way to improve convenience and efficiency for a wide range of projects, but you need to use appropriate force and control that you would not damage the screws.

“If you hurry through a job or exceed the power tool, you can ruin the screw head in an instant,” says Vasilevski. “Wireless drills set to high torque are often guilty. If you are not familiar with them, it is worth taking a moment to install a hand-held screwdriver or drill with a clutch setting for better control.”

First not drilling pilots

Pilot holes are not always needed, but when you drive bolts in hard cleaners or thick materials, you may be a worthwhile step to reduce the risk of removing or even breach of screws.

“The threating pilot holes can help, especially with solid materials,” says Vasilevki. “The maintenance of your bits in good condition is important, such as the blunt harder slide and twisting.”

Tips for avoiding Screw removal

If you are tending to have problems with screws without taking them off, you may need to look at your tools or your driving method.

“Most of the time, it’s just a combination of using wrong tools and don’t maintain constant pressure while driving,” says Vasilevski.

• Choose the correct bit based on the size and type of screw head.
• Keep force and pressure on the screw constant while driving a bolt and avoid excessive tension.
• Always make sure the screwdriver is properly aligned, even if it means that you have to get a different screwdriver to handle more locations.
• Regularly inspect and get rid of worn screwdriver bits that could chew through the screw heads.
• Invest in high quality bolts, especially if you use a cleaning or removal exercise.
• Create a pilot hole for a travel bolt when needed. This will add resistance and prevent the wood from spitting.
• Run the screws under controlled speed, both using a handheld and when using a power drill.